Series Location problem

User (Legacy) · November 20, 2001

Hi

Firstly thanks for the prompt response on my scaling problem.

I have a problem where my series does not seem to be located correctly on

the y axis

Please see the attached image:

The series has points all set to 0.5000 but appears on the axis between 0.50

and 0.51 at roughly 0.504 say

Any pointers why this might be occurring?

regards

____________________________________

Paul Nailand

Visual Risk Pty Ltd

www.visualrisk.com

+61 (2) 9388 1370

+61 (0) 413 002 802

This email and any attachments is intended only for the person to whom

it is addressed. It may contain confidential information. If you receive

this document in error, please immediately delete it from your system

and notify the sender. You must not disclose, copy, use or rely on any

part of this document if you are not the intended recipient.

Software FX · November 27, 2001

The problem here is that your scaling is inconsistent with the number of

decimals you are displaying.

Either your Min value or your Step (or both) are set to a number that has

more than 2 decimals, therefore, the labels are rounded, so 0.50 in the

Y-Axis is probably something like 0.495.

To fix this make sure that the Min has 2 decimals only and if you are

setting a step, make sure the step is a 2-decimals number as well.

--

FP

Software FX, Inc.

Recommended Posts