NAK Posted August 11, 2010 Report Posted August 11, 2010 Hi, I wanted to know if the ChartTypes mentioned in the ChartFx Chart Gallery at : http://www.softwarefx.com/sfxGallery/?bcsi_scan_D3BBB8216286D3A9=3GfFlGj21iZsnheQk6hXRDAAAAAXpKIg#Top are supported for WPF. Thanks in Advance Regards, NAK Quote
JuanC Posted August 11, 2010 Report Posted August 11, 2010 The following galleries are not supported in WPF (note that is not an exhaustive comparison of WPF against our WinForms/WebForms version) 3D Cones (not supported builtin but could theoretically be achieved using templates) 3D Curve Area Exploding Pie (will be supported in 8.1) Advanced Financial Charts: Renko, Kagi, Three Line Break and Point Figure Statistical Charts (most of these will be supported in 8.1) The following galleries are supported in WPF but not in our WinForms/WebForms versions Bullet HighLow Rose WinLoss TreeMap XYZ Support for these galleries will be added in WPF 8.1 Density HeatMap Pareto Waterfall JuanC Quote
NAK Posted August 16, 2010 Author Report Posted August 16, 2010 Thanks JuanC. But it would be of great help if we could direct me to a link where I can find Charts available for WPF from Software FX. We have a requirement where the following Chart Types should be available in WPF for both 2D and 3D: BarStakedBarAreaStacked AreaLineStacked LineSplineStacked SplineSpline AreaStacked Spline AreaCandleStickBubblePieDoughnut2D/3D Surface ChartThanks in Advance Regards, NAK Quote
JuanC Posted August 16, 2010 Report Posted August 16, 2010 Unfortunately at the moment we do not have such a link for WPF, I will forward this to our web guys to suggest they create a similar resource for WPF, there are some WPF samples here but it is not an exhaustive list. I can tell you that we do not support the following galleries from your list 3D Spline Area 3D Stacked Spline Area 3D Candlestick 2D Surface (you could create a 3D surface and rotate so that the camera is on top and disable further rotations though). Regards, JuaNC Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.