Jump to content
Software FX Community

Printing Chart Problem

User (Legacy)

Recommended Posts

Hi All,

I am facing some problems on printing:

1) Why the chartFX (please refer to HPLaser.jpg) cannot print the B&W

hatched patterns on all Series although I set the ForceColor=False ?

I used the HP LaserJet 4 Plus that does not support colors to print this

Chart. All the Series just come out as black color only.

2) Why the Chart (please refer to Tektronix Phaser 740.jpg) did not show

the Axis X LINE if I use Tektronix Phaser 740 Printer to print

the chart ? This situation also appreared on HP DeskJet 970C Series. For

your information, both printers are color printer.

3) The space between each label on Axis X (please refer to HPLaser.jpg) is

so close. How do I overcome it ? For your

information, the label on Axis X control by ChartFx itself and there is

no way for me to set it.

4) Is it possible to printer WYSIWYG chart ? I would like to have the print

out that similar to the chart on my monitor screen in term of

Axis X label, STEP and etc.


Best Regards,

JH Chia

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...