MikeK Posted August 24, 2010 Report Share Posted August 24, 2010 If I set an axis's logbase to 10 and then try to zoom using either the 'Map' or 'Stripe' ZoomStyle it does not zoom correctly (Stripe Zoom will only have problems if the x axis is set as log 10). For example if I set the y axis to logbase 10 and zoom in using the Map zoom it appears that all of the points are squished at the very bottom of the zoom area. This leads me to believe that the zoom area is trying to use linear distance instead of the logarathimic. Please let me know what needs to be done to get zooming working when I have axes set to log 10. Thanks, Mike Quote Link to comment Share on other sites More sharing options...
CarlosAC Posted August 25, 2010 Report Share Posted August 25, 2010 Hi Mike This issue was previously reported to our development team. It is still in a queue to be revised. Please sent us an e-mail to support[at]softwarefx[dot]com in order to receive feedback once the issue is resolved. Carlos Chaves. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.