User (Legacy) Posted December 1, 2003 Report Share Posted December 1, 2003 Hi, when I am using the KeySer property the right gap will calculated wrong. Is there any work around for this problem? Best regards, Thorsten Blawatt Link to comment Share on other sites More sharing options...
Software FX Posted December 1, 2003 Report Share Posted December 1, 2003 Sorry, the RightGap is not automatically adjusted by the KeySer values. You will need to manually increase it. -- FP Software FX, Inc. Link to comment Share on other sites More sharing options...
User (Legacy) Posted December 2, 2003 Author Report Share Posted December 2, 2003 Hi, please file this as a bug. I do not know, how to calculate the right gap. Best regards, Thorsten Blawatt "SoftwareFX Support" <support@softwarefx.com> schrieb im Newsbeitrag news:izDpiDCuDHA.1992@WEBSERVER1... > Sorry, the RightGap is not automatically adjusted by the KeySer values. You > will need to manually increase it. > > -- > FP > Software FX, Inc. > > Link to comment Share on other sites More sharing options...
User (Legacy) Posted December 12, 2003 Author Report Share Posted December 12, 2003 Dear Software FX Support, The described problem that: "If we use a label for the stacked z-axis" the right gab is not calculated correctly is a critical bug in our opinion. See the attached JPG for visualization of the problem. What is the opinion of other customers ?! Please give us a case number and a time frame for a relevant fix for that problem. Regards Martin Cla Link to comment Share on other sites More sharing options...
Software FX Posted December 12, 2003 Report Share Posted December 12, 2003 Dear Martin, As I explain before this is simply not supported. You have to assign the RightGap property to prevent this from happening. The tools are there, you can do it with code, it is simply not automatic. -- FP Software FX, Inc. Link to comment Share on other sites More sharing options...
User (Legacy) Posted December 15, 2003 Author Report Share Posted December 15, 2003 Dear Support I have to accept this answer but I do not understand it. We will search a solution that will work(around) for us. Thank you for your support. Regards Martin Cla Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.