User (Legacy) 2 Report post Posted October 26, 2004 Hello online-support I'm using ChartFX ClientServer 5.1 (it is integrated in ActiveReport2). I have to develope a chart according to the sample attached. In the attached file you can see first the scatterchart and then the values (col1=ID for series, col2=Y-Value, col3=X-Value) Very strange is, that the value 0.0118 doesn't have a dot!? Another proble I'm having: at 0,0 there is always printed a dot!? I tried so much and now don't have any ideas left. Thanks for your help! regards Luzia Quote Share this post Link to post Share on other sites
Software FX 0 Report post Posted October 26, 2004 Try setting the MarkerShape property to any of the predefined values. >> Another proble I'm having: at 0,0 there is always printed a dot!? How are you passing the data ? Note that if you are passing the data manually our arrays are zero-based. -- Regards, JC Software FX Support "Luzia Baumgartner" <nospam@spam.ch> wrote in message news:PWMPAL3uEHA.420@webserver3.softwarefx.com... > Hello online-support > > I'm using ChartFX ClientServer 5.1 (it is integrated in ActiveReport2). I > have to develope a chart according to the sample attached. > > In the attached file you can see first the scatterchart and then the > values (col1=ID for series, col2=Y-Value, col3=X-Value) > > Very strange is, that the value 0.0118 doesn't have a dot!? > > Another proble I'm having: at 0,0 there is always printed a dot!? > > I tried so much and now don't have any ideas left. > > Thanks for your help! > > regards > Luzia > > Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted October 29, 2004 Hello JC I solved the problem with the not printed dot. I set the marker size for the several series out of an array. Unfortunately I didn't fill in all the needed settings.... But I still have the dot at position 0,0. As I'm using ChartFX ClientServer 5.1 I have to fill the data manually, and I start with series no. 0 Do you have an another idea? regards and HANW Luzia "Software FX Support" <noreply> schrieb im Newsbeitrag news:y0O28q4uEHA.420@webserver3.softwarefx.com... > Try setting the MarkerShape property to any of the predefined values. > >>> Another proble I'm having: at 0,0 there is always printed a dot!? > > How are you passing the data ? Note that if you are passing the data > manually our arrays are zero-based. > > -- > Regards, > > JC > Software FX Support > "Luzia Baumgartner" <nospam@spam.ch> wrote in message > news:PWMPAL3uEHA.420@webserver3.softwarefx.com... >> Hello online-support >> >> I'm using ChartFX ClientServer 5.1 (it is integrated in ActiveReport2). I >> have to develope a chart according to the sample attached. >> >> In the attached file you can see first the scatterchart and then the >> values (col1=ID for series, col2=Y-Value, col3=X-Value) >> >> Very strange is, that the value 0.0118 doesn't have a dot!? >> >> Another proble I'm having: at 0,0 there is always printed a dot!? >> >> I tried so much and now don't have any ideas left. >> >> Thanks for your help! >> >> regards >> Luzia >> >> > > Quote Share this post Link to post Share on other sites
Software FX 0 Report post Posted October 29, 2004 Can you post a code snippet that shows how you are passing the data to the chart ? Are you also using 0 based index for the point index ? -- Regards, JC Software FX Support "Luzia Baumgartner" <nospam@spam.ch> wrote in message news:1seUUPbvEHA.424@webserver3.softwarefx.com... > Hello JC > > I solved the problem with the not printed dot. I set the marker size for > the several series out of an array. Unfortunately I didn't fill in all the > needed settings.... > > But I still have the dot at position 0,0. As I'm using ChartFX > ClientServer 5.1 I have to fill the data manually, and I start with series > no. 0 > > Do you have an another idea? > > regards and HANW > Luzia > > "Software FX Support" <noreply> schrieb im Newsbeitrag > news:y0O28q4uEHA.420@webserver3.softwarefx.com... >> Try setting the MarkerShape property to any of the predefined values. >> >>>> Another proble I'm having: at 0,0 there is always printed a dot!? >> >> How are you passing the data ? Note that if you are passing the data >> manually our arrays are zero-based. >> >> -- >> Regards, >> >> JC >> Software FX Support >> "Luzia Baumgartner" <nospam@spam.ch> wrote in message >> news:PWMPAL3uEHA.420@webserver3.softwarefx.com... >>> Hello online-support >>> >>> I'm using ChartFX ClientServer 5.1 (it is integrated in ActiveReport2). >>> I >>> have to develope a chart according to the sample attached. >>> >>> In the attached file you can see first the scatterchart and then the >>> values (col1=ID for series, col2=Y-Value, col3=X-Value) >>> >>> Very strange is, that the value 0.0118 doesn't have a dot!? >>> >>> Another proble I'm having: at 0,0 there is always printed a dot!? >>> >>> I tried so much and now don't have any ideas left. >>> >>> Thanks for your help! >>> >>> regards >>> Luzia >>> >>> >> >> > > Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 2, 2004 this is the code: ------------------------------ with .Controls("ChartFX1") .Gallery = 4 'CHARTFX_SCATTER .View3D = 0 .SerLegBox = True .SerLegBoxObj.Visible = TRUE .SerLegBoxObj.Docked = 515 'am rechten Rand .SerLegBoxObj.Height = 40 .SerLegBoxObj.BorderStyle = 0 'ohne Rahmen .SerLegBoxObj.SkipEmpty = TRUE .OpenDataEx CHARTFX_COD_VALUES,5,iRow + 1 .OpenDataEx CHARTFX_COD_XVALUES,5,iRow + 1 For iRow = 0 To ubound(DataAry,1) if DataAry(iRow,0) = -1 or DataAry(iRow,0) = -2 then aktSeries = aktSeries + 1 xPoint = 0 else if tyRow <> DataAry(iRow,0) then aktSeries = aktSeries + 1 xPoint = 0 end if end if .Series(aktSeries).YValue(xPoint) = ChartValue(DataAry(iRow,1)) .Series(aktSeries).XValue(xPoint) = ChartValue(DataAry(iRow,2)) tyRow = DataAry(iRow,0) xPoint = xPoint + 1 Text1 = Text1 & DataAry(iRow,0) & chr(10) Text2 = Text2 & DataAry(iRow,1) & chr(10) Text3 = Text3 & DataAry(iRow,2) & chr(10) Next .CloseData CHARTFX_COD_XVALUES .CloseData CHARTFX_COD_VALUES .Series(0).BorderColor = RGB(0,0,0) .Series(1).BorderColor = RGB(0,0,0) .Series(2).BorderColor = RGB(0,0,0) .Series(3).BorderColor = RGB(0,0,0) .Series(4).BorderColor = RGB(0,0,0) .Series(0).MarkerShape = 1 .Series(1).MarkerShape = 2 .Series(2).MarkerShape = 3 .Series(3).MarkerShape = 4 .Series(4).MarkerShape = 5 'Min, Max und Schrittweite setzen .Axis(CHARTFX_AXIS_Y).Min = -0.01 .Axis(CHARTFX_AXIS_Y).Max = 0.1 .Axis(CHARTFX_AXIS_Y).Step = 0.01 .Axis(CHARTFX_AXIS_X).Min = -0.01 .Axis(CHARTFX_AXIS_X).Max = 0.1 .Axis(CHARTFX_AXIS_X).Step = 0.01 .PointLabels = TRUE .Axis(CHARTFX_AXIS_Y).Decimals = 4 end with ------------------------------ attached you can find the filled chart, where you can see that I only want three dots. I found out, that this strange 0,0-dot ist printed, when I have more than one value per Series. regards, Luzia "Software FX Support" <noreply> schrieb im Newsbeitrag news:Wz8kgoevEHA.420@webserver3.softwarefx.com... > Can you post a code snippet that shows how you are passing the data to the > chart ? Are you also using 0 based index for the point index ? > > -- > Regards, > > JC > Software FX Support > "Luzia Baumgartner" <nospam@spam.ch> wrote in message > news:1seUUPbvEHA.424@webserver3.softwarefx.com... Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 2, 2004 sorry, I forgot the attachement! regards, Luzia "Software FX Support" <noreply> schrieb im Newsbeitrag news:Wz8kgoevEHA.420@webserver3.softwarefx.com... > Can you post a code snippet that shows how you are passing the data to the > chart ? Are you also using 0 based index for the point index ? > > -- > Regards, > > JC > Software FX Support > "Luzia Baumgartner" <nospam@spam.ch> wrote in message > news:1seUUPbvEHA.424@webserver3.softwarefx.com... Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 2, 2004 sorry, forgot the attachement regards, Luzia "Software FX Support" <noreply> schrieb im Newsbeitrag news:Wz8kgoevEHA.420@webserver3.softwarefx.com... > Can you post a code snippet that shows how you are passing the data to the > chart ? Are you also using 0 based index for the point index ? > > -- > Regards, > > JC > Software FX Support > "Luzia Baumgartner" <nospam@spam.ch> wrote in message > news:1seUUPbvEHA.424@webserver3.softwarefx.com... Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 5, 2004 hello JC, What do you think, when will you have a solution? regards Luzia "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag news:JLGReBPwEHA.1120@webserver3.softwarefx.com... > sorry, forgot the attachement > > regards, > Luzia > > "Software FX Support" <noreply> schrieb im Newsbeitrag > news:Wz8kgoevEHA.420@webserver3.softwarefx.com... >> Can you post a code snippet that shows how you are passing the data to >> the >> chart ? Are you also using 0 based index for the point index ? >> >> -- >> Regards, >> >> JC >> Software FX Support >> "Luzia Baumgartner" <nospam@spam.ch> wrote in message >> news:1seUUPbvEHA.424@webserver3.softwarefx.com... > > > Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 10, 2004 Hello JC I reproduced the problem with a simple chart. Here is my code for filling the chart: with .Controls("ChartFX1") .Gallery = 4 'CHARTFX_SCATTER .View3D = 0 .SerLegBox = True .SerLegBoxObj.Visible = TRUE .SerLegBoxObj.Docked = 515 'am rechten Rand .SerLegBoxObj.Height = 40 .SerLegBoxObj.BorderStyle = 0 'ohne Rahmen .SerLegBoxObj.SkipEmpty = TRUE .OpenDataEx CHARTFX_COD_VALUES,2,1 .OpenDataEx CHARTFX_COD_XVALUES,2,1 .Series(0).YValue(0) = 7.27 .Series(0).XValue(0) = 3.93 .Series(0).YValue(1) = 6.73 .Series(0).XValue(1) = 3.82 .Series(1).YValue(0) = 4.18 .Series(1).XValue(0) = 1.73 .CloseData CHARTFX_COD_XVALUES .CloseData CHARTFX_COD_VALUES .Series(0).BorderColor = RGB(0,0,0) .Series(1).BorderColor = RGB(0,0,0) .Series(0).MarkerShape = 1 .Series(1).MarkerShape = 2 'Min, Max und Schrittweite setzen .Axis(CHARTFX_AXIS_Y).Min = -1 .Axis(CHARTFX_AXIS_Y).Max = 10 .Axis(CHARTFX_AXIS_Y).Step = 1 .Axis(CHARTFX_AXIS_X).Min = -1 .Axis(CHARTFX_AXIS_X).Max = 10 .Axis(CHARTFX_AXIS_X).Step = 1 .Axis(CHARTFX_AXIS_X).Decimals = 1 .Axis(CHARTFX_AXIS_Y).Decimals = 1 end with In the attached File you can see the chart out of this. What am I doing wrong that I have that dot at 0,0? I hope this is information enough for you to see the error or reproduce my problem. Please help, this is very urgent. regards, Luzia "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag news:aTZjq6zwEHA.1120@webserver3.softwarefx.com... > hello JC, > > What do you think, when will you have a solution? > > regards > Luzia > > "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag > news:JLGReBPwEHA.1120@webserver3.softwarefx.com... >> sorry, forgot the attachement >> >> regards, >> Luzia >> >> "Software FX Support" <noreply> schrieb im Newsbeitrag >> news:Wz8kgoevEHA.420@webserver3.softwarefx.com... >>> Can you post a code snippet that shows how you are passing the data to >>> the >>> chart ? Are you also using 0 based index for the point index ? >>> >>> -- >>> Regards, >>> >>> JC >>> Software FX Support >>> "Luzia Baumgartner" <nospam@spam.ch> wrote in message >>> news:1seUUPbvEHA.424@webserver3.softwarefx.com... >> >> >> > > Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 11, 2004 Hello JC Why don't you answer me? Sorry, I don't wanna be impatient, but I need your help. We have a Supportaccount with your company, do I have to send my problem somewhere else? regards Luzia "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag news:7RkSowvxEHA.1116@webserver3.softwarefx.com... > Hello JC > > I reproduced the problem with a simple chart. Here is my code for filling > the chart: > > with .Controls("ChartFX1") > .Gallery = 4 'CHARTFX_SCATTER > .View3D = 0 > > .SerLegBox = True > .SerLegBoxObj.Visible = TRUE > .SerLegBoxObj.Docked = 515 'am rechten Rand > .SerLegBoxObj.Height = 40 > .SerLegBoxObj.BorderStyle = 0 'ohne Rahmen > .SerLegBoxObj.SkipEmpty = TRUE > > .OpenDataEx CHARTFX_COD_VALUES,2,1 > .OpenDataEx CHARTFX_COD_XVALUES,2,1 > > .Series(0).YValue(0) = 7.27 > .Series(0).XValue(0) = 3.93 > .Series(0).YValue(1) = 6.73 > .Series(0).XValue(1) = 3.82 > .Series(1).YValue(0) = 4.18 > .Series(1).XValue(0) = 1.73 > > .CloseData CHARTFX_COD_XVALUES > .CloseData CHARTFX_COD_VALUES > > .Series(0).BorderColor = RGB(0,0,0) > .Series(1).BorderColor = RGB(0,0,0) > > .Series(0).MarkerShape = 1 > .Series(1).MarkerShape = 2 > > 'Min, Max und Schrittweite setzen > .Axis(CHARTFX_AXIS_Y).Min = -1 > .Axis(CHARTFX_AXIS_Y).Max = 10 > .Axis(CHARTFX_AXIS_Y).Step = 1 > .Axis(CHARTFX_AXIS_X).Min = -1 > .Axis(CHARTFX_AXIS_X).Max = 10 > .Axis(CHARTFX_AXIS_X).Step = 1 > > .Axis(CHARTFX_AXIS_X).Decimals = 1 > .Axis(CHARTFX_AXIS_Y).Decimals = 1 > end with > > In the attached File you can see the chart out of this. What am I doing > wrong that I have that dot at 0,0? > > I hope this is information enough for you to see the error or reproduce my > problem. > > Please help, this is very urgent. > > regards, > Luzia > > > "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag > news:aTZjq6zwEHA.1120@webserver3.softwarefx.com... >> hello JC, >> >> What do you think, when will you have a solution? >> >> regards >> Luzia >> >> "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag >> news:JLGReBPwEHA.1120@webserver3.softwarefx.com... >>> sorry, forgot the attachement >>> >>> regards, >>> Luzia >>> >>> "Software FX Support" <noreply> schrieb im Newsbeitrag >>> news:Wz8kgoevEHA.420@webserver3.softwarefx.com... >>>> Can you post a code snippet that shows how you are passing the data to >>>> the >>>> chart ? Are you also using 0 based index for the point index ? >>>> >>>> -- >>>> Regards, >>>> >>>> JC >>>> Software FX Support >>>> "Luzia Baumgartner" <nospam@spam.ch> wrote in message >>>> news:1seUUPbvEHA.424@webserver3.softwarefx.com... >>> >>> >>> >> >> > > > Quote Share this post Link to post Share on other sites
User (Legacy) 2 Report post Posted November 11, 2004 Hello JC Why don't you answer me? Sorry, I don't wanna be impatient, but I need your help. We have a Supportaccount with your company, do I have to send my problem somewhere else? regards Luzia "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag news:7RkSowvxEHA.1116@webserver3.softwarefx.com... > Hello JC > > I reproduced the problem with a simple chart. Here is my code for filling > the chart: > > with .Controls("ChartFX1") > .Gallery = 4 'CHARTFX_SCATTER > .View3D = 0 > > .SerLegBox = True > .SerLegBoxObj.Visible = TRUE > .SerLegBoxObj.Docked = 515 'am rechten Rand > .SerLegBoxObj.Height = 40 > .SerLegBoxObj.BorderStyle = 0 'ohne Rahmen > .SerLegBoxObj.SkipEmpty = TRUE > > .OpenDataEx CHARTFX_COD_VALUES,2,1 > .OpenDataEx CHARTFX_COD_XVALUES,2,1 > > .Series(0).YValue(0) = 7.27 > .Series(0).XValue(0) = 3.93 > .Series(0).YValue(1) = 6.73 > .Series(0).XValue(1) = 3.82 > .Series(1).YValue(0) = 4.18 > .Series(1).XValue(0) = 1.73 > > .CloseData CHARTFX_COD_XVALUES > .CloseData CHARTFX_COD_VALUES > > .Series(0).BorderColor = RGB(0,0,0) > .Series(1).BorderColor = RGB(0,0,0) > > .Series(0).MarkerShape = 1 > .Series(1).MarkerShape = 2 > > 'Min, Max und Schrittweite setzen > .Axis(CHARTFX_AXIS_Y).Min = -1 > .Axis(CHARTFX_AXIS_Y).Max = 10 > .Axis(CHARTFX_AXIS_Y).Step = 1 > .Axis(CHARTFX_AXIS_X).Min = -1 > .Axis(CHARTFX_AXIS_X).Max = 10 > .Axis(CHARTFX_AXIS_X).Step = 1 > > .Axis(CHARTFX_AXIS_X).Decimals = 1 > .Axis(CHARTFX_AXIS_Y).Decimals = 1 > end with > > In the attached File you can see the chart out of this. What am I doing > wrong that I have that dot at 0,0? > > I hope this is information enough for you to see the error or reproduce my > problem. > > Please help, this is very urgent. > > regards, > Luzia > > > "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag > news:aTZjq6zwEHA.1120@webserver3.softwarefx.com... >> hello JC, >> >> What do you think, when will you have a solution? >> >> regards >> Luzia >> >> "Luzia Baumgartner" <nospam@spam.ch> schrieb im Newsbeitrag >> news:JLGReBPwEHA.1120@webserver3.softwarefx.com... >>> sorry, forgot the attachement >>> >>> regards, >>> Luzia >>> >>> "Software FX Support" <noreply> schrieb im Newsbeitrag >>> news:Wz8kgoevEHA.420@webserver3.softwarefx.com... >>>> Can you post a code snippet that shows how you are passing the data to >>>> the >>>> chart ? Are you also using 0 based index for the point index ? >>>> >>>> -- >>>> Regards, >>>> >>>> JC >>>> Software FX Support >>>> "Luzia Baumgartner" <nospam@spam.ch> wrote in message >>>> news:1seUUPbvEHA.424@webserver3.softwarefx.com... >>> >>> >>> >> >> > > > Quote Share this post Link to post Share on other sites
Software FX 0 Report post Posted November 11, 2004 Dear Luiza, This Newsgroups is not a mechanism to contact priority support. Some of us contribute to it but it is in no way a means to get priority support. If you have a support account you need to contact our support depth via e-mail or phone (support at softwarefx dot com). -- FP Software FX Quote Share this post Link to post Share on other sites