Jump to content
Software FX Community
Sign in to follow this  
User (Legacy)

Scale Properties

Recommended Posts

Hi,

Have a chart that displays a percentage.

Sometimes the percentage is 100%

I really don't need the Y axis to show 0 - 100%

50 - 100% is ok.

But, sometimes the value of 30%, so I would like the scale to be 0% to 50%

Is there any way to do this in Reporting Services charts?

Thanks,

Chris Exley

Share this post


Link to post
Share on other sites

Hi,

Have a chart that displays a percentage.

Sometimes the percentage is 100%

I really don't need the Y axis to show 0 - 100%

50 - 100% is ok.

But, sometimes the value of 30%, so I would like the scale to be 0% to 50%

Is there any way to do this in Reporting Services charts?

Thanks,

Chris Exley

Share this post


Link to post
Share on other sites

Well the key word here is "sometimes".

There is a property in the axis called ForceZero that you can turn off, this

way if your values go from 50 to 100 the scale will go from 50 to 100, but

if your values go from 0 to 30 the scale will go from 0 to 30.

--

Francisco Padron

www.chartfx.com

Share this post


Link to post
Share on other sites

Well the key word here is "sometimes".

There is a property in the axis called ForceZero that you can turn off, this

way if your values go from 50 to 100 the scale will go from 50 to 100, but

if your values go from 0 to 30 the scale will go from 0 to 30.

--

Francisco Padron

www.chartfx.com

Share this post


Link to post
Share on other sites

Hi Francisco,

Thanks for the reply. I tried that. 5 data points in my series. All at

100%.

Using an Olap Datasource (not that it should matter)

AxisX labels are: Q4-05, Q1-06, Q2-06, Q3-06, Q4-06

Values for each are 100%.

Chart show 0%, 20%, 40%, 60%, 80%, 100% on Y axis.

AxisY.min = Auto

AxisY.max = Auto

LabelsFormat = Percentage

Scale Unit =1

Step=0

Can you send me picture that shows it works for you?

"SoftwareFX Support" <noreply@softwarefx.com> wrote in message

news:CvUbSB69GHA.332@webserver3.softwarefx.com...

> Well the key word here is "sometimes".

>

> There is a property in the axis called ForceZero that you can turn off,

> this way if your values go from 50 to 100 the scale will go from 50 to

> 100, but if your values go from 0 to 30 the scale will go from 0 to 30.

>

> --

> Francisco Padron

> www.chartfx.com

>

Share this post


Link to post
Share on other sites

Hi Francisco,

Thanks for the reply. I tried that. 5 data points in my series. All at

100%.

Using an Olap Datasource (not that it should matter)

AxisX labels are: Q4-05, Q1-06, Q2-06, Q3-06, Q4-06

Values for each are 100%.

Chart show 0%, 20%, 40%, 60%, 80%, 100% on Y axis.

AxisY.min = Auto

AxisY.max = Auto

LabelsFormat = Percentage

Scale Unit =1

Step=0

Can you send me picture that shows it works for you?

"SoftwareFX Support" <noreply@softwarefx.com> wrote in message

news:CvUbSB69GHA.332@webserver3.softwarefx.com...

> Well the key word here is "sometimes".

>

> There is a property in the axis called ForceZero that you can turn off,

> this way if your values go from 50 to 100 the scale will go from 50 to

> 100, but if your values go from 0 to 30 the scale will go from 0 to 30.

>

> --

> Francisco Padron

> www.chartfx.com

>

Share this post


Link to post
Share on other sites

If I set ForceZero = False, and all values are at 100%

I have seen both of these things happen.

1) All values are shown at the lowest x axis gridline with no context,

there are no values shown on the Y axis.

2) 0, 20, 40, 60, 80, 100 are shown on the Y axis and the Lines are at the

top.

What I would love to be able to do is to set the AxisY.min = Lowest Value

Returned (25%) and he AxisY.max = 100%

Can I do that?

"SoftwareFX Support" <noreply@softwarefx.com> wrote in message

news:U9AZp3G%23GHA.1788@webserver3.softwarefx.com...

> This is normal. What are you expecting to see in the Y-Axis ?

>

> If you don't want the zero you need to set:

>

> ForceZero = false

>

> --

> Francisco Padron

> www.chartfx.com

>

Share this post


Link to post
Share on other sites

If I set ForceZero = False, and all values are at 100%

I have seen both of these things happen.

1) All values are shown at the lowest x axis gridline with no context,

there are no values shown on the Y axis.

2) 0, 20, 40, 60, 80, 100 are shown on the Y axis and the Lines are at the

top.

What I would love to be able to do is to set the AxisY.min = Lowest Value

Returned (25%) and he AxisY.max = 100%

Can I do that?

"SoftwareFX Support" <noreply@softwarefx.com> wrote in message

news:U9AZp3G%23GHA.1788@webserver3.softwarefx.com...

> This is normal. What are you expecting to see in the Y-Axis ?

>

> If you don't want the zero you need to set:

>

> ForceZero = false

>

> --

> Francisco Padron

> www.chartfx.com

>

Share this post


Link to post
Share on other sites

> What I would love to be able to do is to set the AxisY.min = Lowest Value 

> Returned (25%) and he AxisY.max = 100%

> Can I do that?

I don't understand. You said tall values were 100% so where does 25% comes

from ?

--

Francisco Padron

www.chartfx.com

Share this post


Link to post
Share on other sites

> What I would love to be able to do is to set the AxisY.min = Lowest Value 

> Returned (25%) and he AxisY.max = 100%

> Can I do that?

I don't understand. You said tall values were 100% so where does 25% comes

from ?

--

Francisco Padron

www.chartfx.com

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...